Choosing Morpheus8 tips starts with identifying the cartridge your equipment requires. A product title that says “Morpheus8 replacement tip” is not enough to establish the model, device generation or handpiece compatibility.

Clinics searching for InMode Morpheus8 cartridges will encounter references to Prime, facial, Body, Deep, resurfacing and Burst products. These names describe different options within the product family, and they should not be treated as interchangeable.

This guide explains how to distinguish the main tip categories, interpret product listings and check compatibility before purchasing. It is intended for professional product identification and procurement. Clinical selection and use must follow the current manufacturer instructions for the exact equipment and country of operation.

What Are Morpheus8 Tips?

Morpheus8 tips are the replaceable electrode cartridges used with the Morpheus8 fractional radiofrequency microneedling system.

The cartridge attaches to the appropriate handpiece and contains the microneedle configuration used by that system. It is a consumable component, separate from the handpiece and the main workstation.

Suppliers may describe these products as:

• Morpheus8 tips.
• Morpheus8 cartridges.
• Morpheus8 needle tips.
• InMode Morpheus8 replacement tips.
• Morpheus8 RF microneedling cartridges.
• Morpheus8 disposable tips.

These phrases identify a general category. The exact product reference, generation and compatibility information identify the item you need.

Morpheus8 Tip Types at a Glance

InMode’s educational materials describe four tip configurations: 12-pin Prime, 24-pin Morpheus8, 24-pin resurfacing and 40-pin Deep for body applications. Fractional Radiofrequency

This table is an identification guide, not a treatment protocol. It does not establish that a tip fits every device carrying the Morpheus8 name.

Morpheus8 Prime 12-Pin Tips

The Morpheus8 Prime tip has a 12-pin configuration. InMode describes Prime within its tip portfolio for smaller, narrow facial areas. Fractional Radiofrequency

For purchasing, the important question is whether the offered Prime cartridge corresponds to your equipment.

Check the complete name on the individual packaging. Establish whether the listing concerns a standard-generation Prime product or a Burst-generation product, and obtain compatibility documentation for the relevant handpiece.

A supplier’s description of a cartridge as a “small facial tip” does not replace an exact model reference.

Morpheus8 24-Pin Facial Tips

The 24-pin Morpheus8 tip is a commonly listed facial cartridge category. However, “24-pin” alone is incomplete because the Morpheus8 family also includes a distinct 24-pin resurfacing option.

When buying Morpheus8 24-pin cartridges, confirm:

• The complete tip description.
• Whether it is the facial or resurfacing configuration.
• The product generation.
• The reference printed on the packaging.
• The compatible handpiece.
• The number of cartridges included.

This distinction matters when searching for a Morpheus8 tip set. A set containing four 24-pin facial cartridges is different from a mixed set containing several tip types.

Understanding AG607563A and INCN3215 Listings

Some online listings identify a four-piece Morpheus8 24-pin facial tip set using AG607563A and INCN3215. The referenced Parts4Laser page uses those identifiers. Parts4Laser

Treat them as information to verify against the supplied packaging and manufacturer documentation. A code appearing on a reseller page does not, by itself, establish universal compatibility or confirm that both identifiers are manufacturer part numbers.

If you search by either code, compare the complete product description rather than assuming every matching result represents the same item.

Morpheus8 40-Pin Body and Deep Tips

The 40-pin configuration appears in the Morpheus8 body product category. InMode materials use Deep terminology, while supplier listings may also use Body terminology. Fractional Radiofrequency

Do not rely on “40-pin” as the only compatibility check. Confirm the full product name, generation and supported handpiece.

In particular, a listing for a Morpheus8 Body tip should not automatically be treated as equivalent to a listing for Morpheus8 Burst Deep.

For a repeat order, retain a photograph of the previously verified packaging and its exact reference. That record helps purchasing staff identify changes in a supplier’s offered product.

Morpheus8 Resurfacing Tips

Morpheus8 resurfacing cartridges form a separate tip category. They should not be confused with facial cartridges merely because both may be described as 24-pin products.

Search results can include phrases such as “Morpheus8 resurfacing tip,” “resurfacing cartridge” or “T tip.” Abbreviated seller terminology should be checked against the exact product label.

Before ordering, establish whether the offered item is the resurfacing product specified for your system. Its clinical application and operating limits must come from the current manufacturer instructions.

Standard Morpheus8 and Morpheus8 Burst: Why Generation Matters

InMode describes Morpheus8 Burst as having Burst and Scale functions that deliver bipolar RF at multiple tissue depths within a pulse. Its Burst Deep offering includes a 40-pin tip. InModeMD

For buyers, the key implication is that generation is part of product identification.

Do not assume that a standard cartridge is suitable for a Burst handpiece, or that a Burst cartridge is suitable for an earlier system. Shared branding, similar appearance and matching pin counts do not establish interchangeability.

A product advertised as “not compatible with Morpheus8 Burst” should not be purchased for a Burst application. Conversely, an omitted compatibility restriction should not be interpreted as confirmation that the cartridge fits.

What Establishes Cartridge Compatibility?

A useful compatibility check connects three things:

The exact device, the exact handpiece and the exact cartridge.

Ask the supplier to identify the supported combination in writing and provide relevant documentation. Where uncertainty remains, confirm through the manufacturer or the service provider responsible for your equipment.

Provide:

1. Workstation model.
2. Handpiece identification.
3. Device generation.
4. Cartridge reference currently in use.
5. Photographs of the relevant labels.
6. Country of operation.

A statement such as “fits InMode machines” is too broad. InMode offers different technologies and applicators; a brand name alone cannot identify a consumable.

Original, OEM and Compatible Morpheus8 Tips

Product origin and compatibility are separate facts.

“Original” and “OEM” claims should be supported by evidence of manufacturer identity and traceability. A listing described as “compatible with Morpheus8” does not establish original manufacture, manufacturer endorsement or equivalent performance.

Likewise, an independent seller’s business status does not prove or disprove the origin of an individual product.

Before purchasing, ask:

• Who manufactured the cartridge?
• What documentation supports its origin?
• What documentation supports compatibility?
• What warranty or support applies?
• Does manufacturer coverage apply to this purchase?

Packaging photographs can assist identification, but they are not conclusive proof of authenticity. A cartridge being recognized by equipment should not be treated as independent proof of origin.

Single-Use Packaging and Expiry

Morpheus8 cartridge handling must follow the instructions supplied with the exact product. InMode’s published operator manual describes the tips as sterile and single-use. octanecdn.com

Check each cartridge’s protective packaging, labeling and expiry before use. Do not treat an intact outer carton as proof that every individual package is suitable.

Confirm the applicable instructions concerning disposal and handling. Do not assume that cleaning or reprocessing makes a single-use cartridge suitable for another procedure.

What If a Tip Does Not Fit or the Device Displays an Error?

Stop and follow the applicable equipment instructions.

Do not force the cartridge into place, modify its connection or bypass an error. An error can require investigation of the cartridge identity, handpiece connection or equipment condition.

For support, document the exact tip reference, lot number, device and handpiece details, error message and relevant photographs. Keep patient-identifying information out of supplier communications.

Persistent problems should be assessed by the manufacturer or a qualified service provider.

Frequently Asked Questions

Are Morpheus8 tips and cartridges the same thing?

Suppliers commonly use both terms for the replaceable electrode consumable. Neither term identifies the exact model without additional details.

Are all 24-pin Morpheus8 tips the same?

No. Facial and resurfacing configurations should be distinguished, and product generation must also be checked.

Does a 40-pin cartridge fit every Morpheus8 body handpiece?

Do not assume this. Verify the exact cartridge and supported equipment combination.

Can standard Morpheus8 tips be used with Burst?

Compatibility must be confirmed for the specific product. A standard-generation product should not be assumed suitable for Burst equipment.

Is a Morpheus8 tip set always a mixed set?

No. “Set” may mean several identical cartridges. Read the model and quantity description.

Do AG607563A or INCN3215 prove compatibility?

No. Verify what each reference represents and match the supplied product to applicable documentation.

Are Morpheus8 replacement tips suitable for other RF microneedling brands?

Do not assume cross-brand compatibility. Similar pin counts or connectors are insufficient.

Where can I compare purchasing options?

Read our [Morpheus8 cartridge buying guide: prices, tip sets and supplier checks](/blogs/news/buy-morpheus8-tips-price-tip-sets). It explains how to compare equivalent offers and calculate purchasing costs.

Identify the Tip Before Ordering

A reliable Morpheus8 cartridge purchase begins with the full model reference, device generation and supported handpiece. Confirm those details before comparing pack sizes, prices or delivery options.

Morpheus8 and InMode are trademarks of their respective owners. Brand names are used for product identification. This guide does not imply manufacturer affiliation or replace the current instructions for use.